Pipe Mount Adapter – Threaded (PN: 23-0110-0)
The Tallysman Threaded Pipe Mount Adapter is designed to fit all of our TW3000 family of antennas. It is meant for use with the customer’s existing standard pipe. The top and bottom threaded design allows the top thread to be compatible with our TW3000 series antenna base and the bottom thread will fit a standard 1-14 UNS pipe.
For optimum positioning performance, a circular ground plane is recommended.
L-Bracket Mount (PN: 23-0040-0)
The L-Bracket Mount is designed to fit all of Tallysman’s TW3XXX family of antennas. The bracket is available as aluminum (PN: 23-0040-0) or stainless steel (PN: 23-0040-1) and can be pole mounted with either clamps or screws.
Mast Mount (PN: 23-0092-0)
The Tallysman mast mount is designed to accommodate all of Tallysman’s TW3000 antenna family except the N-type connector model. The mast mount can be attached to a another pipe or structure with hose clamps or other compatible methods.
VP6350 VeraPhase® Triple Band GNSS Antenna
The VP6350 VeraPhase® antenna employs Tallysman’s unique VeraPhase® technology covering GPS/QZSS L1/L2/L5, GLONASS G1/G2,G3, Galileo E1/E5a/E5b, BeiDou B1/B2, as well as SBAS (WAAS/EGNOS/GAGAN/MSAS).
Features
- Low axial ratios from horizon to horizon
- Very Tight Phase Center Variation (< 1 mm)
- Low current
- Invariant performance from: +2.7 to 24 VDC
- Space in housing for integrated PPP, RTK receiver or other OEM system.
Benefits
- Consistent performance across all frequencies
- Broadest tracking elevation (0° – 180°)
- Extreme precision
- Excellent multipath rejection
- IP67, REACH, and RoHS compliant
- Reduced time to market
VP6050 VeraPhase® Full GNSS Antenna with L-Band
The VP6050 VeraPhase® antenna employs Tallysman’s unique VeraPhase® technology covering the full GNSS spectrum: GPS/QZSS L1/L2/L5, GLONASS G1/G2/G3, Galileo E1/E5a/E5b/E6, BeiDou B1/B2b/B2a/B3, QZSS L6, NavIC L5, as well as SBAS (WAAS/EGNOS/GAGAN/MSAS), and L-band correction services.
Features
- Low axial ratios from horizon to horizon
- Very Tight Phase Center Variation (< 1 mm)
- Low current: 45 mA
- Invariant performance from: +2.7 to 24 VDC
- Space in housing for integrated PPP, RTK
Benefits
- Consistent performance across all frequencies
- Broadest tracking elevation (0° – 180°)
- Extreme precision
- Excellent multipath rejection
- IP67, REACH, and RoHS compliant
- Reduced time to market
TW4721 Single Band GNSS Antenna
The TW4721 employs Tallysman’s unique Accutenna® technology, covering GPS/QZSS L1, GLONASS G1, Galileo E1, BeiDou B1, as well as SBAS (WAAS/EGNOS/MSAS).
Features
- Dual feed patch element
- Axial ratio: 2 dB typ.
- Low noise LNA: 1 dB typ.
- High rejection mid-section SAW filter
- High gain: 26 dB typ.
- Wide voltage input range: 2.5 to 16 VDC
- IP68 weather proof housing
- Low current consumption: 12 mA
Benefits
- Greatly enhanced multipath rejection
- Improved GNSS reliability
- Excellent signal to noise ratio
- CE RED, REACH, and RoHS compliant
- Ideal for harsh environments
- Excellent out of band signal rejection
TW4722 Single Band GNSS Antenna (Pre-filtered)
The TW4722 employs Tallysman’s unique Accutenna® technology, covering GPS/QZSS L1, GLONASS G1, Galileo E1, BeiDou B1, as well as SBAS (WAAS/EGNOS/MSAS).
Features
- Dual feed patch element
- Axial ratio: 2 dB typ.
- Low noise LNA: 3 dB typ.
- High rejection mid-section SAW filter
- High gain: 24 dB typ.
- Wide voltage input range: 2.5 to 16 VDC
- IP68 weather proof housing
- Low current consumption: 12 mA
Benefits
- Greatly enhanced multipath rejection
- Improved GNSS reliability
- Excellent signal to noise ratio
- CE RED, REACH, and RoHS compliant
- Ideal for harsh environments
- Excellent out of band signal rejection
TW4600 Iridium Antenna
The TW4600 employs Tallysman’s unique Accutenna® technology, covering the Iridium frequency band (1616 MHz – 1626 MHz).
Features
- Dual-feed, wide band patch
- Axial ratio, < 3 dB over full bandwidth
- High gain 4.5 dBic
- Robust design
- Small form factor
Benefits
- Better axial ratio at lower elevation angles
- Higher Rx and Tx success rates
- Compact form factor
- RoHS compliant
TW4421 Single Band GNSS Antenna
The TW4421 employs Tallysman’s unique Accutenna® technology, covering GPS/QZSS L1, GLONASS G1, Gas well as SBAS (WAAS/EGNOS/MSAS).
Features
- Dual-feed patch element
- Axial ratio: 2 dB typ.
- Low noise LNA: 1 dB typ.
- High rejection mid-section SAW filter
- High gain: 28 dB typ.
- Wide voltage input range: 2.5 to 16 VDC
- IP68 compliant weatherproof housing
- Low Current: 12 mA typ.
Benefits
- 1 dB Bandwidth
- Greatly enhanced multi-path rejection
- Improved GNSS reliability
- Excellent signal to noise ratio
- CE RED, REACH, and RoHS compliant
- Ideal for harsh environments
- Excellent out of band signal rejection
TW4422 Single Band GNSS Antenna (Pre-filtered)
The TW4422 employs Tallysman’s unique Accutenna® technology covering GPS/QZSS L1, GLONASS G1, as well as SBAS (WAAS, EGNOS & MSAS).
Features
- Dual feed patch element
- Axial ratio: 2 dB typ.
- High rejection mid-section SAW filter
- High gain: 28 dB typ.
- Wide voltage input range: 2.5 to 16 VDC
- IP68 weather proof housing
- Low Current: 12 mA typ.
Benefits
- 1 dB Bandwidth
- Greatly enhanced multi-path rejection
- Improved GNSS reliability
- Excellent signal to noise ratio
- CE RED, REACH, and RoHS compliant
- Ideal for harsh environments
- Excellent out-of-band signal rejection
