TW151 Signal Splitter
The TW151 is a professional grade DC blocked L-Band 1 to 2 Signal Splitter, suitable for supporting the full GNSS frequency bandwidth.
Features
- DC blocked on both receiver ports
- 1 to 2 GHz operating frequency
- Low insertion loss 1.0 dB @ 2 GHz
- VSWR < 1.25 typ.
- 50 Ohm port impedance
- Clear anodized aluminum, IP67 housing with TNC
- Gold-plated SMA or TNC Jack connectors
- RoHS and REACH Compliant
Benefits
- Allows for external DC source
- Compact form factor
- Allows use of two GNSS receivers to share one antenna
- Fits in-line with antenna cable
- Robust design
- Suitable for harsh environments
TW150 Signal Splitter
The TW150 is a professional grade 1 to 2 L-band signal splitter, suitable for supporting the full GNSS frequency bandwidth.
Features
- 1 to 2 GHz operating frequency
- Low insertion loss 1.0 dB @ 2 GHz
- VSWR < 1.25 typ.
- Max pass through current 200 mA
- 50 Ohm port impedance
- Clear anodized IP67 (with TNC) aluminum housing
- Gold-plated SMA or TNC Jack connectors
- RoHS and REACH Compliant
Benefits
- Compact form factor
- Allows use of two GNSS receivers to share one antenna
- Fits in-line with antenna cable
- Robust design
- Suitable for harsh environments
TW605 Low Noise Choke Ring Antenna Amplifier
The TW605 family of low noise amplifiers (LNA) provides a high-performance amplifier upgrade for full GNSS (GPS/QZSS, GLONASS, Galileo, BeiDou) frequency choke ring antennas.
Features
- Available with 50 dB gain
- Low current and low voltage
- Wide input voltage range: 3 to 17 Volts
- Powered via antenna coax from receiver
- 50 Ohm port impedance
- Very low noise
- RoHS and REACH compliant
Benefits
- Upgrades choke ring antennas to receive the full GNSS band or subset thereof
- High gain enables extended cable runs
- Easy to install
TW141 40dB Inline RF Amplifier (Full GNSS)
Ideal for applications such as mast-mount, roof-top and large vehicle installations, the TW141 provides for much longer cable runs from any Full GNSS (including L-band) antenna to its receiver, with low current and voltage requirements.
Features
- Very low noise: <2 dB
- 17 mA typical current consumption
- Wide input voltage range, 4.5 to 10 VDC
- Powered via antenna coax from receiver
- 50 Ohm port impedance
- Cylindrical nickel-plated brass, IP67 compliant housing
- Available SMA, TNC, and N-Type jack connectors
- RoHS and REACH compliant
Benefits
- Improves signal response
- Enables extended cable runs
- Avoid installation of costly low-loss cable
- Fits in-line with antenna cable
- No external voltage supply needed
- Easy to install – mounting clamp include
TW125B 27dB Inline RF Amplifier (Full GNSS)
Ideal for applications such as mast-mount, roof-top and large vehicle installations, the TW125B provides for much longer cable runs from any GNSS antenna to their receiver, with low current and voltage requirements.
Features
- Low current / Low voltage
- Very low noise
- Wide input voltage range, 3 to 16 VDC
- Powered via antenna coax from receiver
- 50 Ohm port impedance
- Cylindrical nickel-plated brass, IP67 compliant housing
- Available SMA, TNC, and N-Type jack connectors
- RoHS compliant
Benefits
- Improves signal response
- Enables extended cable runs
- Avoid installation of costly low-loss cable
- Fits in-line with antenna cable
- No external voltage supply needed
- Easy to install – mounting clamp include
TW127 25dB Inline RF Amplifier (Upper Band GNSS)
Ideal for applications such as mast-mount, roof-top and large vehicle installations, the TW127 provides for much longer cable runs from any Upper band GNSS antenna (L1, G1, E, B1) to their receiver, with low current and voltage requirements.
Features
- Very low noise
- High-rejection mid-section SAW filter
- Wide input voltage range, 3 to 10 VDC
- Powered via antenna coax from receiver
- 50 Ohm port impedance
- Cylindrical nickel-plated brass, IP67 compliant housing
- Available SMA, TNC, and N-Type jack connectors
- RoHS and REACH compliant
Benefits
- Improves signal response
- Enables extended cable runs
- Avoid installation of costly low-loss cable
- Fits in-line with antenna cable
- No external voltage supply needed
- Easy to install – mounting clamp include
TW120 25dB Inline RF Amplifier (L1, E1, B1)
Ideal for applications such as mast-mount, roof-top and large vehicle installations, the TW120 provides for much longer cable runs from GPS/QZSS L1, Galileo E1, and BeiDou B1 antennas to their receiver.
Features
- Very low noise
- Wide input voltage range, 3 to 12 VDC
- Powered via antenna coax from receiver
- 50 Ohm port impedance
- Cylindrical nickel-plated brass, IP67 compliant housing
- Gold-plated connectors
- RoHS compliant
Benefits
- Improves signal response
- Enables extended cable runs
- Avoid installation of costly low-loss cable
- Fits in-line with antenna cable
- No external voltage supply needed
- Maintains low antenna LNA noise figure
- Easy to install – mounting clamp include
TW3142 Single Band GNSS Antenna
The TW3142 is a high-gain GNSS antenna employing Tallysman’s unique Accutenna® technology, covering GPS/QZSS L1, as well as SBAS (WAAS/EGNOS/MSAS).
Features
- Dual Feed Patch Antenna
- Low Loss SAW Pre-Filter
- Great axial ratio: 1 dB typ.
- Low noise LNA: 3.5 dB typ.
- High gain LNA: 40 dB typ.
- Low current: 20 mA typ.
- Wide voltage input range: 2.5 to 16 VDC
- IP69K, RoHS, and REACH compliant
Benefits
- Great out of band rejection
- Excellent multipath rejection
- Excellent circular polarisation
- Excellent signal to noise ratio
- Increased system accuracy
- Ideal for harsh environments
TW3710P Passive Single Band GNSS Antenna
The TW3710P employs Tallysman’s unique Accutenna® technology, covering GPS/QZSS L1, GLONASS G1, Galileo E1, and BeiDou B1, as well as SBAS (WAAS, QZSS, EGNOS & MSAS).
Features
- Covers all GNSS Constellations
- Great axial ratio: 2.5 dB typ.
- ESD circuit protection 15 KV
- IP69K, RoHS and REACH compliant
Benefits
- Excellent circular polarisation
- Excellent multipath rejection
- Increased system accuracy
- Ideal for harsh environments
TW3101 Single Band GNSS Antenna (Low Magnetism)
The TW3101 employs Tallysman’s unique Accutenna® technology, covering GPS/QZSS L1, as well as SBAS (WAAS/EGNOS/MSAS).
Features
- Great axial ratio: 1dB typ.
- Low Noise Amplifier (LNA): 1 dB
- High rejection SAW filter
- High gain: 27 dB min.
- Low current: 14 mA typ.
- Wide voltage input range: 2.5 to 16 VDC
- IP69K, RoHS and REACH compliant
Benefits
- Excellent multi-path rejection
- Increase system accuracy
- Excellent signal to noise ratio
- Great out of band signal rejection
- Ideal for harsh environments
